clearskies logo - Phoenix Arizona

 

Power Supply Systems for Storage Tanks

Home
Up
System Diagrams

 

SunPump System

by ClearSkies, Inc. 

U.S. Patent # 5692647

 

bulletGeneral Specifications:  SunPump System2000 can be used to power most all 12-24 volt D.C. fuel delivery pumps. Typical application includes photovoltaic modules which maintain a deep cycle battery to provide operating voltage for fuel delivery pumps. A wireless emergency fuel shut-off switch module is easily mounted anywhere within 50' of the fuel storage tanks. A central electronics enclosure is mounted on a steel pole mast mounted directly to fuel storage tank. Options purchased separately include, a wireless overfill and interstitial detection alarm system provides both visual and audible alarm indicators. A key locking system prevents product theft. The entire unit is uniquely designed for 100% portability and ease of installation.    Click here to see our options.
bulletPower Source:  Typical application: 1 ea. 12 volt D.C.. 95 amp. deep cycle, valve regulated sealed lead acid batteries. Specifically designed industrial strength batteries retain a charge 3-10 times longer than old vented types. Approved by the FAA & U.S. Government. Meets 14 CFR part 21, sec. 303 FAR's Meets D.O.T. standards 49 CFR sec. 173.159, not a hazardous material. Weight 126 lbs. 13.8 volts maximum.
bullet

cell type....................... sealed lead acid- valve regulated gas absorbed electrolyte.

bullet

safety.......................... produces < 2% hydrogen gas

bullet

reserve minutes........... 1196 minutes based upon 5 amp draw.

bullet

construction................ rugged, sealed, puncture resistant polypropylene case/cover.

bullet

Capacity 1 charge......... 800 to 1500 gallons delivered @18amp draw.

bulletSolar Panel:    All panels used in the SunPump System 2000 models are anodized aluminum framing in each panel : 35 " w x 39" l. Rated 17.5 volts 50 watts maximum power field wiring: copper only, 14awg insulated for 75Degree C. Fire Rating: Class C complies with jpl blockV tests. All modules exceed government specifications for ; thermal cycling, thermal shock, electrical isolation, freezing and high humidity cycling, hail impact, field exposure, mechanical wind and twist loading tests. 45 lbs. total panel weight.
bulletWireless Communications:    Wireless communication receivers and transmitters, certified by F.C.C. All transmitters operating range, up to 50' VHF frequency bandwidth. Battery: Transmitter, Eveready A23 type or equivalent 12 volt alkaline lighter battery. Transmitter and Receiver: each user settable codes, prevents product theft. Remote transmitters offer full weatherproof protection & enclosed in pole mounted enclosure with resettable key locking switch.
bulletPhysical Specifications:    
Panel Array & Mast/vent:  45 lbs.............35" W x 39" L Central Electronics Enclosure:........................ 100 lb.; 36"x36"x24"
Wireless /Shut-off switching: ................................... 4.5lb.; 7"x8"x4" Operating temperature ........................ -10o to +65oCelsius

 
bulletCentral Electronics Enclosure: Rust resistant weatherproof cabinet for central electronics and battery storage . Pole mast mounted cabinet includes isolation for central electronics communications receiver, charging circuit module and multiple battery storage. Access panel provides for ease of maintenance and installation.

Main System board:
 Wire terminals................................... euro-style terminals sized for # 6 AWG wire . Secured terminal isolation, All contact points clearly identified for simple installation.
 Max wire size (solid)............................. #8 AWG
 Min. wire size....................................... #16 AWG

 Terminal lug hook-up- spade/marked

 Surface mount technology

 Reverse polarity protected

 Negative Ground

Charging Circuit:
 input voltage...................................... 30 vdc
 input current max.............................. 30 ADC

 input current minimum....................... 30 mA

 charge stop voltage.......................... 14.35 vdc

 call wiring.............................................. copper only

 operating temperature..................... -40o C. / +65oC.

 electronic fuse/system safety

 humidity to 100%

 radiated noise<100 picowatts/Khz.

 low noise rc filtered output, line noise less than 400mV pulses under 500 nanoseconds width

 Electrical LCD display, 3 LED's display system charging status
 self consumption............................... typical 10mA
 typical serviceable life of relays- 10,000 cycles @ 30 amps use
bulletFuel Vent/Tower Mast:    Solar panel pole mast provides tank venting as well as solar array mount. 62" height meets NFC for fuel venting and eliminates the need for a separate support for the SunPump system. Also provides mounting support for the central electronics enclosure. Entire mast and vent pole assembly engineered for durability, high wind loading and transportability incorporating double lock hinge system.

tank mount.......................................... standard 3"N.S.H thread

vent pipe............................................. 3" Schedule A steel pipe

rust resistant................................... powder coated gray finish

 

Home Up System Diagrams

1-888-808-1200

Send mail to webmaster@clearskies with questions or comments about this web site.
Copyright  1999 Clearskies, Inc.
Last modified: January 23, 2011       
This site is currently under construction... check back soon for new and exciting information!